☰
Leaded Tin Bronze or High Leaded Tin Bronze are less expensive when compared to other bearing alloys. Primary function of this alloy is to improve machinability. Leaded Bronzes are well known for their resistance towards Corrosion and abrasion. The higher lead content allows the alloy to retain favourable thermal conductivity and good lubricity.
C93700 also known as 80/10/10 Bronze is combined with high lead and high tin content which provides good corrosion resistance. The lead acts as a lubricant and contribute to excellent machinability and anti-frictional properties of this alloy. The bearings made from C93700 have excellent wear resistance under high speed and heavy pressure.
| ELEMENT | Copper | Aluminium | Iron | Nickel | Zinc | Lead | Tin | Silicon | Sulphur | Antimony | Phosphorus |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Min (%) | 78.00 | - | - | - | - | 8.00 | 9.00 | - | - | - | 0.10 |
| Max (%) | 82.00 | 0.005 | 0.70 | 0.50 | 0.80 | 11.00 | 11.00 | 0.005 | 0.08 | 0.50 | 1.50 |
Note: Ni includes Co; Cu+ named elements >= 99.5%; Unless otherwise noted, single values represent maximums.
AEPL produces C92200, C92300, C92400, C92500, C92600, C92700, C92900, C93100, C93200, C93400, C93500, C93600, C93800, C93900, C94000, C94400, C94500, CC490K, CC495K, CC498K, CC499K, CuPb10Sn, CuPb10Sn10, CuSn10Pb10, CuSn10Pb5, CuSn7Pb6Zn3, LB-2, LBC-3, LBC-4, LTB-4, LTB-5, Leaded Tin Bronze alloy in the form of Certified Ingots weighing from 8 to 10 Kgs each.
AEPL has implemented a quality system for Copper Based Alloys where all processes are monitored from start to finish i.e. from procurement of raw material, their combination, manufacturing processes, measurement and chemical analysis. We maintain our own laboratory with calibrated equipments to ensure delivery of certified ingots as per International Standards and satisfy clients' requirements. The equipment includes Optical Emission Spectrometer which uses arc and spark excitation technology. Samples of test reports are available upon request.
AEPL manufactures and supplies Copper Alloys products to Domestic as well as International Markets. Located at a single site, our smaller foundries are equipped to use in-house certified ingots and create complex shapes of Copper alloy castings and turn them into finished components using Drilling, Grinding and CNC turning centres.
| CDA: C93700 | CuSn10Pb10 | CuPb10Sn10 | 80-10-10 Bronze | BS1400: LB2 |
|---|
| soldering | brazing | machinability rating |
|---|---|---|
| GOOD | GOOD | 80 |
| product category | product | reason |
|---|---|---|
BUILDERS HARDWARE: |
Brackets. | Corrosion Resistance, Corrosion Resistance to Numerous Environments, Good Machinability, Relatively Low Strength. |
FASTENERS: |
Nuts, Washers for Engines. | Corrosion Resistance, Corrosion Resistance to Numerous Environments, Wear Resistance, Excellent Machinability. |
INDUSTRIAL: |
Applications Requiring Acid Resistance to Sulphite Fluids, Bearing Plates, Bearings, Bearings, Bearings, Bushings for high speed and heavy pressure, Corrosion Resistant Castings, Crank Shafts, High Speed, Heavy Load Bearings, Impellers, Machine Parts, Parts for Steel Mill Maintenance, Pressure Tight Castings, Pumps, Slide Guides for Steel Mills. | Corrosion Resistance, Corrosion Resistance to Brackish Water, Corrosion Resistance to Many Industrial Chemicals, Corrosion Resistance to Numerous Environments, Wear Resistance, Excellent Machinability, Relatively Low Strength, Anti-Seizing Properties, Low Coefficient of Friction, Pressure Tightness upto 260 C, Retains Strength at Elevated Temperatures. |
MARINE: |
Large Bearings for Ships. | Corrosion Resistance, Corrosion Resistance to Salt Water, Anti-Seizing Properties, Low Coefficient of Friction, Wear Resistance. |
