☰
Leaded brasses set the standard by which the machinability of other materials is judged and is also available in a very wide variety of product forms and sizes to allow minimum machining to finished dimensions. Leaded brass is used for its excellent machinability, good strength and atmospheric corrosion resistance. While all brasses are intrinsically easy to machine, the addition of small amounts of lead to brasses further improves this property. Lead acts as a lubricant decreasing the friction coefficient between the tool and the material, creating discontinuities that promote the chip fragmentation, reducing the cutting force and the tool wear rate. Brasses can contain up to 3.5 percent in lead contents, and are classified as low, medium, or high-leaded.
C35300 a Medium Leaded Brass exhibits a variety of characteristics that make it suitable for different manufactured parts and products. The alloy is used in applications requiring a combination of machining and forming operations, without annealing.
| ELEMENT | Copper | Iron | Zinc | Lead | Other Impurities |
|---|---|---|---|---|---|
| Min (%) | 60.00 | - | Balance | 1.50 | - |
| Max (%) | 63.00 | 0.15 | 2.50 | 0.40 |
Adinath produces C-33500, C-34000, C-34200, C-34500, C-35000, C-36300, 35330, C-36500, C-37000, C-37100, C-3712, CW601N, CW602N, CW604N, CW605N, CW606N, CW607N, CW610N, CW611N, CW621N, CW622N, CW623N, CW624N, CZ119, CZ130, CZ132, DTD:627, IS:319 Gr-III, Leaded Brass alloy in the form of Extruded Rods in different shapes & sizes.
From: Dia 8 mm up to 120 mm
From: A/F 10 mm up to 100 mm
From: A/F 10 mm up to 90 mm
From: A/F 10 x 12 mm up to 100 x 50 mm
Outer Diameter : In Round, Hex & Square.
From : 30 mm up to 120 mm
Inner Diameter (Round):
From : 20 mm up to 80 mm
As per Customers' Drawing
Length: Up to 4 Meters
Delivery Condition: As Extruded or Cold Drawn.
Straight Knurling & Cross Knurling will be available upon shape & size Feasibility of Brass Rod
AEPL's Quality Management System ensures documented process controls from start to finish. Material identification and inspection are carried out in all stages of production.
Chemical check by Handheld analyzers.
Pyrometers and Optical Emission Spectrometer
Identification by Punching Heat Codes
Tag allocation by Heat Number/Order codes as it moves down the production line
Mechanical Testing - Tensile Strength, Elongation and Hardness
Handling, Processing and Packaging Procedures to ensure delivery in prime condition
All bars manufactured at AEPL are supplied with full certifications helping us to deliver the exact specification demanded by our specific customer base.
AEPL manufactures and supplies Copper Alloys Extruded Bars to Domestic as well as International Markets. Our customer base has a key advantage since our Foundries, Laboratories, Extrusion Mill, Shell Mouldings and CNC Machine shop are all located on a single site, which eliminates waste and allows excellent quality control at each stage. Our ability to reclaim swarf and machined chips allows us to offer competitive pricing for the parts that we either extrude or cast. For further details, please visit the below link.
| Range (mm) | UTS (Mpa) | PS Min (Mpa) | Elongation Min (%) | Hardness (HRB) |
|---|---|---|---|---|
| Over 2 to 12 Inclusive | 395 - 555 | 170 | 7 | 60 - 80 |
| Over 12 to 25 Inclusive | 380 - 485 | 170 | 10 | 50 - 75 |
| Over 25 to 75 Inclusive | 345 - 425 | 140 | 15 | 40 - 70 |
| Range (mm) | UTS (Mpa) | PS Min (Mpa) | Elongation Min (%) | Hardness (HRB) |
|---|---|---|---|---|
| Over 3 to 12 Inclusive | 395 - 555 | 170 | 7 | 60 - 80 |
| Over 12 to 25 Inclusive | 380 - 485 | 170 | 10 | 50 - 75 |
| Over 25 to 70 Inclusive | 345 - 425 | 140 | 15 | 40 - 70 |
| Range (mm) | UTS (Mpa) | PS Min (Mpa) | Elongation Min (%) | Hardness (HRB) |
|---|---|---|---|---|
| Over 3 to 12 Inclusive | 395 - 555 | 170 | 7 | 60 - 80 |
| Over 12 to 25 Inclusive | 380 - 485 | 170 | 10 | 50 - 75 |
| Over 25 to 60 Inclusive | 345 - 425 | 140 | 15 | 40 - 70 |
| SOLDERING | BRAZING | MACHINABILITY RATING |
|---|---|---|
| EXCELLENT | GOOD | 90 |
| product category | DESCRIPTION |
|---|---|
BUILDERS HARDWARE: |
Drawer Handles, Drawer Pulls, Hinges. |
CONSUMER :  |
Bicycle Spoke Nipples, Clock and Watch Parts, Clock Plates and Nuts, Key Blanks. |
FASTENERS : |
Nuts, Rivets, Screws. |
INDUSTRIAL: |
Adapters, Automatic Screw Machine Parts, Bearing Cages, Channel Plate, Couplings, Flare Fittings, Gears, Instrument Backs, Pinions, Ratchets, Valve Stems, Wheels. |
OTHERS: |
Engravers Plate. |
| PLUMBING: |
Faucet Seats, Pipe Fittings, Plumbers' Brass Goods, Plumbers Fittings. |
