☰
Naval Brass, as the name indicates, were originally developed for sea water service applications since it is a hard and durable material that provides excellent corrosion resistance, hot workability, and hot forgeability. Majority of the grades falling under Naval Brass are considered Lead Free products with Lead content around 0.20%. The usage of Naval Brass is not limited to Marine products, but also in bushings, valve stems, fasteners and wear strip because of its higher tensile strength and wear resistance properties. Tin is used in Naval Brass which slow down dezincification and can also control the rate of corrosion to allow acceptable practical service lives for marine products.
IS 219 Grade II Naval Brass is defined as per the Bureau of Indian Standards. The presence of lead ensures ease in hot forging and machining.
| ELEMENT | Copper | Tin | Lead | Iron | Zinc | Other Impurities |
|---|---|---|---|---|---|---|
| Min (%) | 59.00 | 0.50 | 0.50 | - | Balance | - |
| Max (%) | 62.00 | 1.00 | 1.00 | 0.10 | 0.20 |
From: Dia 7 mm up to 120 mm.
From: A/F 7 mm up to 100 mm.
From: A/F 7 mm up to 90 mm.
From: A/F 7 x 10 mm up to 100 x 50 mm.
Outer Diameter: In Round, Hex & Square.
From: 30 mm up to 120 mm.
Inner Diameter (Round):
From: 20 mm up to 80 mm.
As per Customers' Drawing.
Length: Up to 4 Meters.
Delivery Condition: As Extruded or Cold Drawn.
Straight Knurling & Cross Knurling will be available upon shape & size Feasibility of Brass Rod
AEPL's Quality Management System ensures documented process controls from start to finish. Material identification and inspection are carried out in all stages of production.
Chemical check by Handheld analyzers.
Pyrometers and Optical Emission Spectrometer.
Identification by Punching Heat Codes.
Tag allocation by Heat Number/Order codes as it moves down the production line.
Mechanical Testing - Tensile Strength, Elongation and Hardness.
Handling, Processing and Packaging Procedures to ensure delivery in prime condition.
All bars manufactured at AEPL are supplied with full certifications helping us to deliver the exact specification demanded by our specific customer base.
AEPL manufactures and supplies Copper Alloys Extruded Bars to Domestic as well as International Markets. Our customer base has a key advantage since our Foundries, Laboratories, Extrusion Mill, Shell Mouldings and CNC Machine shop are all located on a single site, which eliminates waste and allows excellent quality control at each stage. Our ability to reclaim swarf and machined chips allows us to offer competitive pricing for the parts that we either extrude or cast. For further details, please visit the below link.
| Range (mm) | UTS Min (MPa) | PS Min (MPa) | Elongation Min (%) | Hardness (HRB) |
|---|---|---|---|---|
| Over 3 to 75 Inclusive | 390 | - | 15 | - |
| Range (mm) | UTS Min (MPa) | PS Min (MPa) | Elongation Min (%) | Hardness (HRB) |
|---|---|---|---|---|
| Over 3 to 65 Inclusive | 390 | - | 15 | - |
| Range (mm) | UTS Min (MPa) | PS Min (MPa) | Elongation Min (%) | Hardness (HRB) |
|---|---|---|---|---|
| Over 3 to 60 Inclusive | 390 | - | 15 | - |
| Range (mm) | UTS Min (MPa) | PS Min (MPa) | Elongation Min (%) | Hardness (HRB) | |
|---|---|---|---|---|---|
| Thickness | Over 3 to 50 Inclusive | 390 | - | 15 | - |
| soldering | brazing | machinability rating |
|---|---|---|
| EXCELLENT | GOOD | 70 |
| product category | DESCRIPTION |
|---|---|
MARINE: |
Marine Hardware, Seawater Valve Stems. |
INDUSTRIAL: |
Gears, Light Bearings, Screw Machine Parts, Valve Stems. |
FASTENERS: |
Fasteners. |
